Revolving Planet Wire Wrap Pendant Tutorial
You will receive your tutorial in an email as a PDF instantly upon purchase.
The tutorial is 41 pages long, with 44 fully illustrated easy to follow steps. This tutorial is recommended for advanced beginner wire wrapper. You should have a basic understanding of weaving and hand forming basic shapes.
Check to verify that the 20ga wire will fit through the hole of the bead. If not, replace all occurrences of 20ga (.081cm) dead soft wire with 22ga (0.64cm) dead soft wire.
6 pieces of 20ga (0.81cm) dead soft wire 13” (33cm) each
or, 6 pieces 22ga (0.64cm) dead soft wire 13” (33cm) each
200” (508cm) 28ga (0.32cm) wire
28mm round bead (center drilled)
8mm ID (inside diameter) open jump ring
Chain, ribbon, or cord (I used 3.2mm copper ball chain with 11.2 x 4.2mm connector). Length of your choosing.
Chain nose or long nose pliers
Bent nose pliers
Nylon jaw pliers
Ruler or measuring tape
Bobbin (used to manage weaving wire)
Please do not distribute, lend or copy.
Do not mass produce.
Please give credit to the Instructor.
Feel free to contact me with any questions.
For my free tutorials, check out www.youtube.com/c/sharonburnettartisan And please subscribe!